Power Station Valve normative reference document 1)
The terms of the following documents by the standard reference in the provisions of this standard. For dated references, subsequent amendments to all single (not including the corrections) or revisions are not applicable to this standard, however, encourage the parties to reach an agreement under this standard to explore the possibility to use the latest version of these documents . For undated reference documents, the latest versions apply to this standard.
GB / T 3323-1987 Steel Radiographic fusion welded butt joints and quality of classification
GB / T 3985 Asbestos rubber sheet
GB / T 4213-1992 pneumatic valve
GB / T 4622.1 ~ 3 Spiral wound gasket
GB / T 5677-1985 Steel Castings radiography and film grade classification
GB / T 6414-1999 casting dimensional tolerances and machining allowances (eqvlSO 8062:1994)
GB / T 9112-1988 Steel pipe flange type and parameters
GB / T 9113.126-1988 Integral steel pipe flanges
GB / T 9115.1 ~ 36-1988 welded steel pipe flange
GB / T 9443-1988 Steel Castings and the defect penetration testing showed traces marks the rating method
GB / T 9444-1988 Steel Castings Magnetic Particle Testing and quality rating system
GB / T 10868-1989 Power Reduction Valve technical conditions
GB / T 10869-1989 control valves for power station
GB / T 12221-1989 flanged metal valve structure length (neq IS0 5752:1982)
GB / T 12222-1989 Multi-turn valve actuator attachment (idt lSO 5210-1 ~ 5210-3:1982)
GB / T 12223-1989 part of the rotary valve actuator connection (idt lSO 5211-1 ~ 5211-3:1982)
GB / T 12224-1989 General requirements for steel valves (neq ANSI B l6.34: 1981)
GB / T 12225-1989 General valve copper alloy castings
GB / T 12230-1989 General Valve austenitic steel castings
GB / T 12234-1989 valve flange, and welded steel gate valves
GB / T 12235-1989 General valve flange steel valve and lift check valves
GB / T 12236-1989 General Steel Swing Check Valve
GB / T 12237-1989 valve flange, and welded steel ball valves
GB / T 12241-1989 General requirements for safety valve (eqv IS0 4126:1984)
GB / T 12242-1989 safety valve performance test method (neq ANSI / ASTM PTC 25.3:1976)
GB / T 12243-1989 Spring loaded safety valve (neq JIS B8210: 1978)
GB / T 12244-1989 General requirements for valve
GB / T 12245-1989 valve performance test method
GB / T 12246-1989 Pilot operated valve
GB / T 15188.1 ~ 4-1994 length of the valve structure
JB / T 74-1994 pipe flanges (neq DIN 2535 ~ 2547, DIN 2573 ~ 2637)
JB/Tl06 valve paint marking and identification
JB / T 1613-1993 boiler pressure parts welding conditions
JB / T 2203-1999 spring-loaded safety valve structure length
JB / T 2205-2000 valve structure length
JB / T 4018 Power Station Valve method for the model
JB / T 5263-1991 Power Station Valve Steel castings (neq ANSF / ASTM A 217M)
JB / T 6900-1993 sewage valve
JB / T 7370 flexible graphite braided packing
JB / T 7927-1999 quality requirements for the appearance of cast steel valves
JB / T 8219-1999 Industrial process measurement and control systems Electric Actuator
JB / T 8528-1997 general technical conditions for valve electric device
JB / T 8529-1997 flameproof electric devices for valve
JB / T 9624-1999 Power Safety Valve specification
JB / T 9625-1999 Annex pressure boiler pipe steel castings
JB / T 9626-1999 Boiler forgings
JC / T 67 Rubber asbestos packing
JC / T 68 Oil asbestos packing
SDGJ6-1990 Thermal Power Plant Steam Piping Stress computing requirements