Parker Fluid Control Division has released the Dual-Flow dispensing valve for the fuel dispensing market. The Dual-Flow solenoid valve controls two flow rates, high-flow to low-flow, on command at the fuel servicing pump. The new product line meets both speed and precision requirements for dispensing and filling applications. Designed as if it were two valves within one compact assembly, the Dual-Flow valve requires only a single dual-wound coil to release fuel. Through this design feature, the valve accurately dispenses a predetermined amount of liquid by providing a high-flow (full-flow) for bulk delivery, and then switches to the low-flow mode to dispense the final amount required. The Dual-Flow valve operates within a maximum ambient and fluid temperature of 104F, and consumes power at a high of 15 watts and a low of 8 watts. Port sizes are available in 3/4in, 1in and 1-1/2in with an operating pressure differential of 5 – 50psi. Standard materials for construction include a brass body; fluorocarbon seals; NBR diaphragm; copper shading ring; and stainless steel sleeve, plunger, and springs. A Class F coil comes taped with three gasoline vapor-resistant lead wires. This product is both UL listed and CSA certified with ATEX available upon request.